ZyXEL Communications VMG3925-B30C - The Trust Domain Screen

Chapter 32 Remote Management
VMG3925-B10C/B30C User’s Guide
256
The following table describes the fields in this screen.
32.3 The Trust Domain Screen
Use this screen to view a list of public IP addresses which are allowed to access the VMG through the
services configured in the Maintenance > Remote MGMT screen. Click Maintenance > Remote MGMT >
Turst Domain to open the following screen.
Note: If this list is empty, all public IP addresses can access the VMG from the WAN through
the specified services.
Figure 145 Maintenance > Remote MGMT > Trust Domain
The following table describes the fields in this screen.
Table 113 Maintenance > Remote MGMT
LABEL DESCRIPTION
WAN Interface
used for services
Select Any_WAN to have the VMG automatically activate the remote management service
when any WAN connection is up.
Select Multi_WAN and then select one or more WAN connections to have the VMG activate the
remote management service when the selected WAN connections are up.
service This is the service you may use to access the VMG.
LAN/WLAN Select the Enable check box for the corresponding services that you want to allow access to the
VMG from the LAN/WLAN.
WAN Select the Enable check box for the corresponding services that you want to allow access to the
VMG from all WAN connections.
Trust Domain Select the Enable check box for the corresponding services that you want to allow access to the
VMG from the trusted hosts configured in the Maintenance > Remote MGMT > Trust Domain
screen.
If you only want certain WAN connections to have access to the VMG using the corresponding
services, then clear WAN, select Trust Domain and configure the allowed IP address(es) in the
Trust Domain screen.
Port You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Apply Click Apply to save your changes back to the VMG.
Cancel Click Cancel to restore your previously saved settings.
Table 114 Maintenance > Remote MGMT > Trust Domain
LABEL DESCRIPTION
Add Trust
Domain
Click this to add a trusted host IP address.