Chapter 4 Tutorials
VMG3925-B10C/B30C User’s Guide
44
4.3.4 Configuring Wireless Security on the VMG
This section shows you how to configure wireless security settings with the following parameters on your
VMG.
Follow the steps below to configure the wireless settings on your VMG.
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see Section 2.2 on page 16).
1 Go to the Network Setting > Wireless > General screen to enable the 2.4 GHz wireless network.
2 Enter SSID_Example as the SSID and select Auto to have the VMG scans for and select an available
channel automatically.
Frequency Band 2.4 GHz
SSID SSID_Example
Channel Auto
Security WPA2-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)
To Next Page
Loading...
