Chapter 7 Wireless
VMG3925-B10C/B30C User’s Guide
103
Figure 33 Wireless > General: No Security
The following table describes the labels in this screen.
7.2.2 More Secure (WPA2-PSK)
The WPA2-PSK security mode is a newer, more robust version of the WPA encryption standard. It offers
slightly better security, although the use of PSK makes it less robust than it could be.
Click Network Setting > Wireless to display the General screen. Select More Secure as the security level.
Then select WPA2-PSK from the Security Mode list.
Figure 34 Wireless > General: More Secure: WPA2-PSK
The following table describes the labels in this screen.
Table 15 Wireless > General: No Security
LABEL DESCRIPTION
Security Level Choose No Security to allow all wireless connections without data encryption or authentication.
Table 16 Wireless > General: More Secure: WPA2-PSK
LABEL DESCRIPTION
Security Level Select More Secure to enable WPA(2)-PSK data encryption.
Security Mode Select WPA2-PSK from the drop-down list box.
Generate
password
automatically
Select this option to have the VMG automatically generate a password. The password field will
not be configurable when you select this option.
To Next Page
Loading...
