Chapter 9 Routing
VMG3925-B10C/B30C User’s Guide
148
9.3 The DNS Route Screen
Use this screen to view and configure DNS routes on the VMG. Click Network Setting > Routing > DNS
Route to open the following screen.
Figure 63 Network Setting > Routing > DNS Route
The following table describes the labels in this screen.
9.3.1 The DNS Route Add Screen
You can manually add the VMG’s DNS route entry. Click Add New DNS Route in the Network Setting >
Routing > DNS Route screen. The screen shown next appears.
Figure 64 DNS Route Add
Table 37 Network Setting > Routing > DNS Route
LABEL DESCRIPTION
Add New DNS
Route
Click this to add a new DNS route.
# This is the index number of a DNS route.
Status This field displays whether the DNS route is active or not. A yellow bulb signifies that this DNS route
is active. A gray bulb signifies that this DNS route is not active.
Domain Name This is the host name or domain name of the DNS route entry.
WAN Interface This is the WAN connection through which the VMG forwards DNS requests for this domain name.
Subnet Mask This is the subnet mask of the DNS route entry.
Modify Click the Edit icon to modify the DNS route.
Click the Delete icon to delete the DNS route.
To Next Page
Loading...
