Chapter 1 Introducing the VMG
VMG3925-B10C/B30C User’s Guide
24
1.4.4 Using the WLAN and WPS Buttons
If the wireless network is turned off, press the WLAN button for more than two seconds. Once the 2.4G
WLAN/WPS or 5G WLAN/WPS LED turns green, the wireless network is active.
You can also use the WLAN button to quickly set up a secure wireless connection between the VMG
and a WPS-compatible client by adding one device at a time.
To activate WPS:
1 Make sure the POWER LED is on and not blinking.
2 Press the WPS button for more than five seconds and release it.
3 Press the WPS button on another WPS-enabled device within range of the VMG. The 2.4G WLAN/WPS or
5G WLAN/WPS LED flashes orange while the VMG sets up a WPS connection with the other wireless
device.
4 Once the connection is successfully made, the 2.4G WLAN/WPS or 5G WLAN/WPS LED shines green.
To turn off the wireless network, press the WLAN button for two to five seconds. The 2.4G WLAN/WPS or 5G
WLAN/WPS LED turns off when the wireless network is off.
1.4.5 Rear Panel
The following graphic displays the rear panel of the VMG.
WPS Press the WPS button for more than five seconds to quickly set up a secure
wireless connection between the device and a WPS-compatible client.
USB The USB port is used for file-sharing and media server.
Rear Panel Ports (continued)
LABEL DESCRIPTION
To Next Page
Loading...
