Chapter 12 Dynamic DNS Setup
VMG3925-B10C/B30C User’s Guide
190
Figure 94 DNS Entry: Add/Edit
The following table describes the labels in this screen.
12.3 The Dynamic DNS Screen
Use this screen to change your VMG’s DDNS. Click Network Setting > DNS > Dynamic DNS. The screen
appears as shown.
Figure 95 Network Setting > DNS > Dynamic DNS
Table 67 DNS Entry: Add/Edit
LABEL DESCRIPTION
Host Name Enter the host name of the DNS entry.
IP Address Enter the IP address of the DNS entry.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.
To Next Page
Loading...
