Chapter 1 Introducing the VMG
VMG3925-B10C/B30C User’s Guide
23
1.4.3 Side Panel
The following graphics display the side panel of the VMG.
Figure 9 VMG3925-B10C/B30C Side Panel
The following table describes the items on the rear panel.
5G WLAN/
WPS
Green On The 5 GHz wireless network is activated.
Blinking The VMG is communicating with 5 GHz wireless clients.
Amber Blinking The VMG is setting up a WPS connection with a 5 GHz wireless client.
Off The 5 GHz wireless network is not activated.
USB
Green On The VMG recognizes a USB connection through the USB1 slot.
Blinking The VMG is sending/receiving data to /from the USB device connected to
it.
Off The VMG does not detect a USB connection through the USB1 slot.
Table 1 LED Descriptions (continued)
LED COLOR STATUS DESCRIPTION
Rear Panel Ports
LABEL DESCRIPTION
WLAN Press the WLAN button for more than two seconds to enable the wireless
function.
To Next Page
Loading...
