Chapter 8 Home Networking
VMG3925-B10C/B30C User’s Guide
137
8.4.1 Turning On UPnP in Windows 7 Example
This section shows you how to use the UPnP feature in Windows 7. UPnP server is installed in Windows 7.
Activate UPnP on the VMG.
Make sure the computer is connected to a LAN port of the VMG. Turn on your computer and the VMG.
1 Click the start icon, Control Panel and then the Network and Sharing Center.
2 Click Change Advanced Sharing Settings.
3 Select Turn on network discovery and click Save Changes. Network discovery allows your computer to
find other computers and devices on the network and other computers on the network to find your
computer. This makes it easier to share files and printers.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 30 Network Setting > Home Networking > UPnP (continued)
LABEL DESCRIPTION
To Next Page
Loading...
