Chapter 15 Interface Group
VMG3925-B10C/B30C User’s Guide
199
Click Network Setting > Interface Grouping to open the following screen.
Figure 101 Network Setting > Interface Grouping
The following table describes the fields in this screen.
15.2.1 Interface Group Configuration
Click the Add New Interface Group button in the Interface Grouping screen to open the following
screen. Use this screen to create a new interface group.
Note: An interface can belong to only one group at a time.
Table 72 Network Setting > Interface Grouping
LABEL DESCRIPTION
Add New
Interface Group
Click this button to create a new interface group.
Group Name This shows the descriptive name of the group.
WAN Interface This shows the WAN interfaces in the group.
LAN Interfaces This shows the LAN interfaces in the group.
Criteria This shows the filtering criteria for the group.
Modify Click the Delete icon to remove the group.
Add Click this button to create a new group.
To Next Page
Loading...
