Chapter 23 Traffic Status
VMG3925-B10C/B30C User’s Guide
239
Figure 133 System Monitor > Traffic Status > NAT
The following table describes the fields in this screen.
Table 102 System Monitor > Traffic Status > NAT
LABEL DESCRIPTION
Refresh Interval Select how often you want the VMG to update this screen.
Device Name This displays the name of the connected host.
IPv4 Address This displays the IP address of the connected host.
MAC Address This displays the MAC address of the connected host.
No. of Open
Session
This displays the number of NAT sessions currently opened for the connected host.
Total This displays what percentage of NAT sessions the VMG can support is currently being used by
all connected hosts. You can also see the number of active NAT sessions and the maximum
number of NAT sessions the VMG can support.
To Next Page
Loading...
