Chapter 6 Broadband
VMG3925-B10C/B30C User’s Guide
91
Data Budget
(kPackets)
Select this and specify how much downstream and/or upstream data (in k Packets) can be
transmitted via the cellular connection within one month.
Select Download/Upload to set a limit on the total traffic in both directions.
Select Download to set a limit on the downstream traffic (from the ISP to the VMG).
Select Upload to set a limit on the upstream traffic (from the VMG to the ISP).
If you change the value after you configure and enable budget control, the VMG resets the
statistics.
Reset all budget
counters on
Select the date on which the VMG resets the budget every month. Select last if you want the
VMG to reset the budget on the last day of the month. Select specific and enter the number of
the date you want the VMG to reset the budget
Reset time and
data budget
counters
Click this button to reset the time and data budgets immediately. The count starts over with the
cellular connection’s full configured monthly time and data budgets. This does not affect the
normal monthly budget restart; so if you configured the time and data budget counters to reset
on the second day of the month and you use this button on the first, the time and data budget
counters will still reset on the second.
Actions before
over budget
Specify the actions the VMG takes before the time or data limit exceeds.
Enable % of time
budget/data
budget
(Mbytes)/data
budget
(kPackets)
Select Enable and enter a number from 1 to 99 in the percentage fields. If you change the value
after you configure and enable budget control, the VMG resets the statistics.
Actions when
over budget
Specify the actions the VMG takes when the time or data limit is exceeded.
Current Cellular
connection
Select Keep to maintain an existing cellular connection or Drop to disconnect it.
Actions
Enable Email
Notification
Select this to enable the e-mail notification function. The VMG will e-mail you a notification when
there over budget occurs.
Mail
Account
Select an e-mail address you have configured in Maintenance > Email Notification. The VMG
uses the corresponding mail server to send notifications.
You must have configured a mail server already in the Maintenance > Email Notification screen.
Cellular
Backup E-
mail Title
Type a title that you want to be in the subject line of the e-mail notifications that the VMG sends.
Send
Notification
to Email
Notifications are sent to the e-mail address specified in this field. If this field is left blank,
notifications cannot be sent via e-mail.
Enable Log Select this to activate the logging function at the interval you set in this field.
Interval Enter the interval of how many minutes you want the VMG to e-mail you.
Basic Click this to hide the advanced settings of cellular backup.
Apply Click Apply to save your changes back to the VMG.
Cancel Click Cancel to return to the previous configuration.
Table 11 Network Setting > Broadband > Cellular Backup (continued)
LABEL DESCRIPTION
To Next Page
Loading...
