Chapter 7 Multy M1 Web Configurator Tutorials
Multy WiFi System User’s Guide
136
7.4 Configure Main WiFi Networks
In the Multy M1 you can configure independent wireless networks with different privileges. Clients can
associate only with the network for which they have security settings (SSID and password). The following
table describes the different Multy M1’s profile networks and their privileges.
Note: A user can only configure the WiFi networks’ security settings if they are connected to
the Main WiFi network.
1 Click the Navigation Panel icon on the top-left corner ( ), and click Settings to open the WiFi screen.
Use each tab in the WiFi menu to configure each of the WiFi networks’ security settings.
2 Select Enable Main WiFi to activate a WiFi Network. Enter the 2.4G/5G Name and Password clients use to
connect to the WiFi network. You can configure two different WiFi Names for the Main WiFi 2.4G and 5G
networks. Select Keep 2.4G & 5G name the same, so they both use the same WiFi Name. Click Apply to
save your changes.
Table 12 WiFi Network Privileges
WIFI NETWORK INTERNET ACCESS
2.4G / 5G WIFI
NETWORK
ACCESS TO WEB
CONFIGURATOR
ACCESS TO WIRED LAN
Main WiFi Yes 2.4G and 5G Yes Yes
Guest WiFi Yes 2.4G and 5G No No
To Next Page
Loading...
