Chapter 7 Multy M1 Web Configurator Tutorials
Multy WiFi System User’s Guide
150
The password should be 8 to 32 single-byte or double-byte characters. Spaces are allowed. \”’‘<>^$&
and emojis are not allowed.
7.11 Change the Operating Mode
The operating mode refers to how the Multy M1 is being used in the network. The Multy M1 has two
operating modes:
• Standard: This is the Multy M1’s default mode. In this mode, the Multy M1 routes traffic between a
local network and another network such as the Internet.
• Bridge: Use this mode so the Multy M1 bridges traffic between clients on the same network.
Note: The Parental Control, UPnP, Port Forwarding functions are not available in Bridge mode.
1 Click the Navigation Panel icon on the top-left corner ( ).From the Settings drop-down list, click
System, then click the Operating Mode tab. Select the operating mode you want to use and select
APPLY to save the changes. Changing the Multy M1’s operating mode may take up to two minutes.
To Next Page
Loading...
