Chapter 8 Multy Plus Tutorials
Multy WiFi System User’s Guide
181
2 Once you have successfully finished the Multy installation, you can relocate it to a WiFi dead zone
where you need WiFi signal.
8.13 Change Your Multy Plus Operating Mode
The operating mode refers to how the Multy Plus is being used in the network. The Multy Plus has two
operating modes:
• Standard: This is the Multy Plus’s default mode. In this mode, the Multy Plus routes traffic between a
local network and another network such as the Internet. If you wish your Multy Plus to have Access
Control, UPnP, Port Forwarding, DMZ function, choose this mode.
• Bridge: Use this mode so the Multy Plus bridges traffic between clients on the same network. You can
choose this mode if you have an existing router.
Note: AiShield, Access Control, UPnP, Port Forwarding, DMZ are not available in Bridge mode.
To Next Page
Loading...
