ZyXEL Communications XMG1915 Series - SNMP Configuration; SNMP Overview; Configuring SNMP Settings

Chapter 26 SNMP
XMG1915 Series User’s Guide
157
CHAPTER 26
SNMP
26.1 SNMP Overview
This chapter introduces the SNMP screens and shows you how to setup SNMP settings for management.
26.1.1 What You Can Do
• Use the SNMP screen (Section 26.2 on page 157) to configure general SNMP settings.
• Use the SNMP User screen (Section 26.3 on page 159) to create SNMP users for authentication with
managers using SNMP v3 and associate them to SNMP groups.
• Use the SNMP Trap Group screen (Section 26.4 on page 161) to specify the types of SNMP traps that
should be sent to each SNMP manager.
• Use the SNMP Trap Port screen (Section 26.5 on page 162) to enable/disable sending SNMP traps on a
port.
26.2 Configure SNMP
Use this screen to configure your SNMP settings.
Click SYSTEM > SNMP to view the screen as shown.