ZyXEL Communications XMG1915 Series - Add;Edit LLDP-MED Location

Chapter 33 Link Layer Discovery Protocol (LLDP)
XMG1915 Series User’s Guide
204
Figure 142 PORT > LLDP > LLDP MED > LLDP-MED Location
The following table describes the labels in this screen.
33.10.1 Add/Edit LLDP-MED Location
To access this screen, click the Add/Edit button or select an entry from the list and click the Add/Edit
button.
Table 106 PORT > LLDP > LLDP MED > LLDP-MED Location
LABEL DESCRIPTION
Index This lists the index number of the location configuration. Click an index number to view or edit
the location.
Port This lists the port number of the location configuration.
Location
Coordinates
This field displays the location configuration information based on geographical coordinates
that includes longitude, latitude, altitude and datum.
Civic Address This field displays the Civic Address for the remote device using information such as Country,
State, County, City, Street, Number, ZIP code and additional information.
ELIN Number This field shows the Emergency Location Identification Number (ELIN), which is used to
identify endpoint devices when they issue emergency call services. The valid length is form
10 to 25 characters.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Add/Edit Click Add/Edit to add a new location or edit a selected one.
Delete Select the locations that you want to remove, then click Delete.