Chapter 29 Time Range
XMG1915 Series User’s Guide
171
CHAPTER 29
Time Range
29.1 Time Range Overview
You can set up one-time and recurring schedules for time-oriented features, such as PoE and classifier.
The UAG supports one-time and recurring schedules. One-time schedules are effective only once, while
recurring schedules usually repeat. Both types of schedules are based on the current date and time in
the Switch.
The time range can be configured in two ways – Absolute and Periodic. Absolute is a fixed time range
with a start and end time. Periodic is recurrence of a time range and does not have an end time.
29.1.1 What You Can Do
Use the Time Range screen (Section 29.2 on page 171) to view or define a schedule on the Switch.
29.2 Configuring Time Range
Click SYSTEM > Time Range in the navigation panel to display the screen as shown.
Figure 120 SYSTEM > Time Range
The following table describes the labels in this screen.
Table 85 SYSTEM > Time Range
LABEL DESCRIPTION
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Index This field displays the index number of the rule.
Name This field displays the descriptive name for this rule. This is for identification purpose only. You can
enter up to 32 printable ASCII characters except [ ? ], [ | ], [ ' ], [ " ] or [ , ].
To Next Page
Loading...
