Chapter 47 Static MAC Forwarding
XMG1915 Series User’s Guide
265
Port Enter the port where the MAC address entered in the previous field will be automatically
forwarded.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Clear Click Clear to clear the fields to the factory defaults.
Cancel Click Cancel to not save the configuration you make and return to the last screen.
Table 142 SWITCHING > Static MAC Forwarding > Add/Edit (continued)
LABEL DESCRIPTION
To Next Page
Loading...
