Chapter 51 DHCP
XMG1915 Series User’s Guide
297
Figure 209 DHCP Smart Relay Network Example
Configure the NETWORKING > DHCP > DHCPv4 Relay > DHCP Smart Relay screen as shown. Make sure
you select a DHCP option 82 profile (default1 in this example) to set the Switch to send additional
information (such as the VLAN ID) together with the DHCP requests to the DHCP server. This allows the
DHCP server to assign the appropriate IP address according to the VLAN ID. Click Apply after you finish
the configuration.
Figure 210 DHCP Relay Configuration Example
To Next Page
Loading...
