Chapter 6 Tutorials
XMG1915 Series User’s Guide
85
Tutorial: Tag Untagged Frames
5 Go to SECURITY > DHCP Snooping > DHCP Snp. Setup, activate and specify VLAN 100 as the DHCP VLAN
as shown. Click Apply.
IP requests from VLANs you enable on the SECURITY > DHCP Snooping > DHCP Snp. VLAN Setup screen
will be broadcast to the DHCP VLAN you set on this screen, which is VLAN100 in this example.
Tutorial: Specify DH CP VLAN
6 Go to SECURITY > DHCP Snooping > DHCP Snp. Port Setup. Select Trusted in the Server Trusted state field
for port 4 because the DHCP server is connected to port 4. Keep ports 5 and 6 Untrusted because they
are connected to DHCP clients. Click Apply.
To Next Page
Loading...
