ZyXEL Communications ZyWALL 310 - Page 27

27/255
www.zyxel.com
Set Local Policy to be the IP address range of the network connected to the
ZyWALL/USG (Branch) and Remote Policy to be the IP address range of the
network connected to the ZyWALL/USG (HQ).
Figure 34 Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings
(Configuration)
This screen provides a read-only summary of the VPN tunnel. Click Save.
Figure 35 Quick Setup > VPN Setup Wizard > Welcome > Wizard Type > VPN Settings
(Summary)
Now the rule is configured on the ZyWALL/USG. The Phase 1 rule settings appear
in the VPN > IPSec VPN > VPN Gateway screen and the Phase 2 rule settings