ZyXEL Communications ZyWALL 310 - Page 28

28/255
www.zyxel.com
appear in the VPN > IPSec VPN > VPN Connection screen. Click Close to exit the
wizard.
Figure 36 Quick Setup > VPN Setup Wizard > Welcome > Wizard Type > VPN
Settings > Wizard Completed
Go to CONFIGURATION > VPN > IPSec VPN > VPN Gateway > Show Advanced
Settings. Configure Authentication > Peer ID Type as Any to let the ZyWALL/USG
does not require to check the identity content of the remote IPSec router.
Figure 37 CONFIGURATION > VPN > IPSec VPN > VPN Gateway > Show Advanced
Settings > Authentication > Peer ID Type
Go to CONFIGURATION > VPN > IPSec VPN > VPN Connection > Show Advanced
Settings > Policy. Select Enable GRE over IPSec.