ZyXEL Communications ZyWALL 310 - Page 47

47/255
www.zyxel.com
Assign the remote users IP addresses range from 192.168.10.10 to 192.168.10.20 for use
in the L2TP VPN tunnel and check Allow L2TP traffic Through WAN to allow traffic from
L2TP clients to go to the Internet. Click Next.
Figure 70 Quick Setup > VPN Setup Wizard > Welcome > VPN Settings (L2TP VPN
Settings)
8 This screen provides a read-only summary of the VPN tunnel. Click Save.
Figure 71 Quick Setup > VPN Setup Wizard > Welcome > VPN Settings (Summary)
Now the rule is configured on the ZyWALL/USG. The rule settings appear in the VPN >
L2TP VPN screen. Click Close to exit the wizard.