ZyXEL Communications ZyWALL 310 - Page 48

48/255
www.zyxel.com
Figure 72 Quick Setup > VPN Setup Wizard > Welcome > VPN Settings > Wizard
Completed
Go to CONFIGURATION > VPN Connection > Create new Object > Create Address,
create an address object as the NAT router’s WAN IP address (in the example,
172.100.20.30).
Figure 73 CONFIGURATION > VPN Connection > Create new Object > Create
Address
Go to CONFIGURATION > VPN Connection > Policy > Local Policy, select it be to the
NAT router’s WAN IP address (in the example, 172.100.20.30).