Chapter 43 Content Filtering
ZyWALL Series CLI Reference Guide
374
content-filter profile
filtering_profile commtouch-url match
{block | log | pass}
Firmware v4.50 or earlier
Sets the action for attempted access to web pages that
match the Web Content Filter profile’s selected legacy
managed categories.
Block access, allow and log access, display a warning
message before allowing access, or allow access.
content-filter profile
filtering_profile [commtouch-url]
match {block | log | pass}
Firmware v4.55 or later
Sets the action for attempted access to web pages that
match the profile’s selected managed categories.
Block access, allow and log access, display a warning
message before allowing access, or allow access.
The commtouch-url option has no effect, and is only
included for compatibility.
content-filter profile
filtering_profile commtouch-url
offline {block | log | warn | pass}
Firmware v4.50 or earlier
Sets the action for attempted access to web pages if the
legacy external web filtering database is unavailable.
Block access, allow and log access, display a warning
message before allowing access, or allow access.
content-filter profile
filtering_profile [commtouch-url]
offline {block | log | warn | pass}
Firmware v4.55 or later
Sets the action for attempted access to web pages if the
external web filtering database is unavailable.
Block access, allow and log access, display a warning
message before allowing access, or allow access.
The commtouch-url option has no effect, and is only
included for compatibility.
content-filter profile
filtering_profile commtouch-url
unrate {block | log | warn | pass}
Firmware v4.50 or earlier
Sets the action for attempted access to web pages that the
legacy external web filtering service has not categorized.
Block access, allow and log access, display a warning
message before allowing access, or allow access.
content-filter profile
filtering_profile [commtouch-url]
unrate {block | log | warn | pass}
Firmware v4.55 or later
Sets the action for attempted access to web pages that the
external web filtering service has not categorized.
Block access, allow and log access, display a warning
message before allowing access, or allow access.
The commtouch-url option has no effect, and is only
included for compatibility.
content-filter profile
filtering_profile commtouch-url log-
all
Firmware 4.50 or earlier.
The Zyxel Device creates a log message each time an IPv4
address is scanned by the Web Content Filter service.
content-filter profile
filtering_profile [commtouch-url]
log-all
Firmware v4.55 or later
The Zyxel Device creates a log message each time an IPv4
address is scanned by the Web Content Filter service.
The commtouch-url option has no effect, and is only
included for compatibility.
Table 207 content-filter Filtering Profile Commands Summary (continued)
COMMAND DESCRIPTION
To Next Page
Loading...
