ZyXEL Communications ZyWALL USG100-Plus - 6.3 How to Use SSH for Secure Telnet Access; 6.3.1 Example 1: Microsoft Windows

Chapter 6 Maintenance
ZyWALL USG100-PLUS User’s Guide
123
3 Repeat the steps above if you need to add other user groups.
6.3 How to Use SSH for Secure Telnet Access
This section shows two examples using a command interface and a graphical interface SSH client
program to remotely access the ZyWALL. The configuration and connection steps are similar for
most SSH client programs. Refer to your SSH client program user’s guide.
6.3.1 Example 1: Microsoft Windows
This section describes how to access the ZyWALL using the Secure Shell Client program.
1 Launch the SSH client and specify the connection information (IP address, port number) for the
ZyWALL.
2 Configure the SSH client to accept connection using SSH version 1.
3 A window displays prompting you to store the host key in you computer. Click Yes to continue.
Enter the password to log in to the ZyWALL. The CLI screen displays next.