Chapter 4 Create Secure Connections Across the Internet
ZyWALL USG100-PLUS User’s Guide
80
4.6.3 Configuring L2TP VPN on the ZyWALL Video Example
Use Adobe Reader 9 or later or a recent version of Foxit Reader to play this video. After clicking
play, you may need to confirm that you want to play the content and click play again.
4.6.4 Configuring L2TP VPN in Android
To configure L2TP VPN in an Android device, go to Menu > Settings > Wireless & networks >
VPN settings > Add VPN > Add L2TP/IPSec PSK VPN and configure as follows. The example
settings here go along with the L2TP VPN configuration example in Section 4.6.1 on page 75.
• VPN name is for the user to identify the VPN configuration.
• Set VPN server is the ZyWALL’s WAN IP address.
• Set IPSec pre-shared key is the pre-shared key of the IPSec VPN gateway the ZyWALL uses
for L2TP VPN over IPSec (top-secret in this example).
• Enable L2TP secret turn this off.
• DNS search domain leave this on.
• When dialing the L2TP VPN, the user will have to enter his account and password.
To Next Page
Loading...
