ZyXEL Communications ZyWALL USG100-Plus - 5.1.8 Bandwidth Management Video Example; 5.1.9 What Can Go Wrong?; 5.2 How to Configure a Trunk for WAN Load Balancing

Chapter 5 Managing Traffic
ZyWALL USG100-PLUS User’s Guide
100
5.1.8 Bandwidth Management Video Example
Use Adobe Reader 9 or later or a recent version of Foxit Reader to play this video. After clicking
play, you may need to confirm that you want to play the content and click play again.
5.1.9 What Can Go Wrong?
• The “outbound” in the guaranteed bandwidth settings apply to traffic going from the connection
initiator to the outgoing interface. The “inbound” refers to the reverse direction.
• Make sure you have registered the IDP/App.Patrol service on the ZyWALL to use App Patrol
Service as the service type in the bandwidth management rules. The application patrol service
uses the ZyWALL’s IDP packet inspection signatures to classify services.
5.2 How to Configure a Trunk for WAN Load Balancing
These examples show how to configure a trunk for two WAN connections to the Internet. The
available bandwidth for the connections is 1 Mbps (wan1) and 512 Kbps (wan2 or cellular1)