Chapter 5 Managing Traffic
ZyWALL USG100-PLUS User’s Guide
99
1 In the Configuration > BWM screen, click Add.
2 In the Add Policy screen, select Enable and type FTP LAN-to-DMZ as the policy’s name.
Select lan1 as the incoming interface and dmz as the outgoing interface.
Select App Patrol Service and ftp as the service type.
Type 10240 (kbps) with priority 5 for both the inbound and outbound guaranteed bandwidth. Do
not select the Maximize Bandwidth Usage. Set the maximum to 51200 (kbps). Click OK.
Finally, in the BWM screen, select Enable BWM. Click Apply.
To Next Page
Loading...
