ZyXEL Communications ZyWALL USG100-Plus - 3.8 Content Filter Profile Configuration

Chapter 3 Protecting Your Network
ZyWALL USG100-PLUS User’s Guide
54
3.8 Content Filter Profile Configuration
Content filter allows you to control access to specific web sites or filter web content by checking
against an external database. This tutorial shows you how to configure a Content Filter profile.
Note: You need to first activate your Content Filter service license or trial to use
Commtouch or BlueCoat content filtering service. See Device and Service
Registration on page 47.
1 You will first configure a content filter profile. Click Configuration > Anti-X > Content Filter >
Filter Profile > Add to open the following screen. Enter a profile Name and select Enable
Content Filter Category Service and select desired actions for the different web page categories.
Then select the categories to include in the profile or select Select All Categories. Click Apply.