Chapter 4 Create Secure Connections Across the Internet
ZyWALL USG100-PLUS User’s Guide
91
1 Install the SafeWord 2008 authentication server software on a computer.
2 Create user accounts on the ZyWALL and in the SafeWord 2008 authentication server.
3 Import each ZyWALL OTPv2 token’s database file (located on the included CD) into the server.
4 Assign users to ZyWALL OTPv2 tokens on the server.
5 Configure the SafeWord 2008 authentication server as a RADIUS server in the ZyWALL’s
Configuration > Object > AAA Server screens.
6 Configure the appropriate authentication method object to use the SafeWord 2008 authentication
server RADIUS server object.
7 Configure Auth. Policy and VPN to use the authentication method object.
8 Give the ZyWALL OTPv2 tokens to the assigned users.
9 A user presses his ZyWALL OTPv2 token’s button to generate a password to enter in the Login
screens’ One-Time Password field.
4.7.1 What Can Go Wrong
• Users cannot log in if they try to re-use a password that they have already used to log in. Users
must generate a new password for each login.
• Authentication fails if the SafeWord 2008 authentication server goes down, loses its network
connection, or is too busy. Users can try again a little later.
To Next Page
Loading...
