2N IP series Automation Manual

2N TELEKOMUNIKACE a.s., www.2n.cz 64/104
LogEvent
The block defines the action that logs the event to the syslog server. This LogEvent
block can be used for verification of Automation settings.
Parameters
– define the event to launch this action.Event
– define the condition to be met for the action to be executed. This Condition
parameter is optional.
Example
Send a syslog message with captured event 2 (Event.CardEntered) if the event
defined on row 2 arises:

2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple