2N IP series User Manual

Configuration manual for 2N IP intercoms
143 / 282
•
•
•
•
5.4.6 Integration
The Integration service provides interconnection of the device and third party equipment.
ACS
Enabled – enable calling to the Axis Camera Station (ACS). A special URI in the format
vms:* is used for ACS calls.
Username – set the username for ACS call authentication.
Password – set the password for ACS call authentication.
Genetec Synergis
Enabled – enable connection with the Genetec Synergis external security system.

2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple