2N IP series - Page 184

Configuration manual for 2N IP intercoms
184 / 282
•
•
•
The Backlight brightness settings are valid for the backlight intensity of the main unit, buttons
and extending modules.
The Signaling LEDs settings are valid for the signaling LEDs of the2N
®
IP Versoextending
modules.
Intensity by day–set the LED intensity percentage value for the day mode.
Intensity by night–set the LED intensity percentage value for the night mode.If the
Intensity by day andIntensity bynight are set to one and the same value, the ambient
light level is ignored.
Current value–display the current LED intensity valueautomatically selected according
to the ambient daylight level.