2N IP series User Manual

Configuration manual for 2N IP intercoms
190 / 282
•
•
•
•
•
timeout to disable the power saving mode. Any movement in front of the intercom camera
or any display event (such as door lock activation or display touch) restores the full
brightness of the display.
Hide Inactive Users– select this to automatically hide the user on the display whose
active time profile disables contacting.
Showcase Mode – set whether the device shall go into the showcase mode when idle.
Choose various options in the showcase mode (OFF, Slideshow).
Delay of Showcase Mode Activation –set the idle timeout in the range of 1 to 600
seconds after which the device goes into the Showcase Mode. There is always a fixed 15-
second timeout for the device to return to the homescreen.
Original Language–download the localization file template for own translation. It is an
XML file with all the texts to be displayed.
Custom Language–remove, download and upload a localization file of your own.
•
•
•
•
•
If none of the pre-defined languages is convenient for you, proceed as follows:
Download the original language file (English).
Modify the file using a text editor (replace the English texts with your own ones).
Upload the modified localization file to the intercom.
SetLanguage Settings | LanguagetoCustom.
Check and correct if necessary the texts on the intercom display.


2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple