2N IP series User Manual

Configuration manual for 2N IP intercoms
213 / 282
•
Note
The extending modules are
displayed in the order
corresponding to their
interconnection. The modules
connected further from the basic
unit are listed below. If more
modules of the same type are
connected to one intercom, it
may be difficult to assign a
setting to a particular module. In
this case, identify the modules
connected using the Locate
Module button. The module will
flash shortly several times when
you press the button.

•
Caution
Having connected the card
reader module via the VBUS
cable to a device into which the
2N
®
PICard reading keys have
been uploaded, remember to
pair the module with the device.
Without pairing, the card reader
module will not have access to
the reading keys and be unable
to read encrypted cards. Click
Pair Module to pair the module.


2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple