2N IP series User Manual

Configuration manual for 2N IP intercoms
241 / 282
•
•
•
•
•
•
List of Parameters
Network
Basic
Use DHCP Server– enable automatic obtaining of the IP address from the LAN DHCP
server. If the DHCP server is unavailable or inaccessible in your LAN, use the manual
network settings.
Static IP Address– static IP address of the intercom, which is used together with the
below mentioned parameters if theUse DHCP Serverparameter is disabled.
Network Mask– network mask.
Default Gateway– address of the default gateway, which provides communication with
off-LAN equipment.
Primary DNS– primary DNS server address for translation of domain names to IP
addresses.The primary DNS value is 8.8.8.8 upon factory reset.
Secondary DNS– secondary DNS server address to be used in case the primary DNS is
inaccessible. The secondary DNS value is 8.8.4.4 upon factory reset.

2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple