2N IP series User Manual

Configuration manual for 2N IP intercoms
246 / 282
•
•
•
•
•
•
•
•
•
Server Address– OpenVPN Server Address
Server Port–OpenVPN Server Port.
Trusted Certificate– specify a set of certificates issued by certification authorities to
verify the OpenVPN server public certificate validity. Choose one of three certificate sets,
see the Certificates subsection. If no certificate issued by a certification authority is
specified, the OpenVPN server public certificate is not validated.
Client Certificate– specify a set of client certificates to verify the client’s identity by the
OpenVPN server. Choose one of three certificate sets, see the Certificates subsection. If no
client certificate is specified, the OpenVPN client identity is not validated.
State– display the OpenVPN connection state: Connected/Disconnected.
Error– display the OpenVPN connection error type if any.
Start– connect the device to OpenVPN.
Stop– disconnect the device from OpenVPN.
VPN– display the basic information on VPN.
•
Tip
Refer to FAQ for OpenVPN server and client setting details.


2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple