2N IP series User Manual

Configuration manual for 2N IP intercoms
245 / 282
•
•
•
•
•
Authentication Allowed – enable authentication of network devices via the 802.1x PEAP
MSCHAPv2 protocol. Do not enable this function if your LAN does not support 802.1x. If
you do so, the device will become inaccessible.
Trusted Certificate – specify the CA certificate for verifying the RADIUS server public
certificate validity. If none is available, the RADIUS server public certificate is not
validated.
Password – enter the access password for PEAP-MSCHAPv2 authentication.
OpenVPN
Use OpenVPN to connect the device to another network.
Enabled– enables the virtual private network (VPN).
Default Interface– if enabled, it directs all outgoing network traffic to the VPN interface
outside the LAN mask.

2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple