2N IP series User Manual

Configuration manual for 2N IP intercoms
244 / 282
•
•
•
TLS Authentication Enabled– enable authentication of network devices via the 802.1x
EAP-TLS protocol. Do not enable this function if your LAN does not support 802.1x. If you
do so, the intercom will become inaccessible.
Trusted Certificate– specify the set of trusted certificates for verification of the RADIUS
server public certificate validity. Choose one of three sets of certificates; refer to the
Certificates subsection. If no trusted certificate is included, the RADIUS public certificate is
not verified.
User Certificate– specify the user certificate and private key for verification of the
intercom authorisation to communicate via the 802.1x-securednetwork element port in
the LAN. Choose one of three sets of user certificates and private keys; refer to the
Certificates subsection.

2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple