2N IP series - Page 267

Configuration manual for 2N IP intercoms
267 / 282
•
•
•
•
•
•
•
•
•
•
Connection Status–display the current ACS connection state or error state description if
necessary.
Communication Status Detail– server communication error code or HTTP status code.
Connection test– test the TR069 connection according to the set profile, see the Active
profile. The test result is displayed in the Connection status.
ACS Address– set the ACS address in the following format: ipaddress[: port],
192.168.1.1:7547, for example.
Username– set the user name for intercom authentication while connecting to the ACS
server.
Password– set the user password for intercom authentication while connecting to the
ACS server.
Verify Server Certificate– set the set of CA certificates for validation of the ACS public
certificate. Choose one of three sets, see the Certificates subsection. If none is selected,
the ACS public certificate is not validated.
Client Certificate– specify the client certificate and private key to validate the intercom
right to communicate with the ACS. Choose one of three sets, refer to the Certificates
subsection.
Periodic Inform Enabled– enable periodical logging of the intercom to the ACS.
Periodic Inform Interval– set the interval of periodical logging of the intercom to the ACS
if enabled by thePeriodic Inform Enabledparameter.