2N IP series User Manual

Configuration manual for 2N IP intercoms
8 / 282
•
•
•
•
•
•
•
•
•
•
•
•
Proxy address–settheSIPProxyIPaddressordomainname.
Proxy port–settheSIPProxyport(typically5060).
Backup Proxy Address–settheSIPProxyIPaddressordomainnametobeused
where the main proxy fails to respond to requests. The address is used where the
main proxy fails to respond to requests.
Backup Proxy Port–setthebackupSIPProxyport(typically5060).
Registration enabled–enableintercomregistrationwiththesetSIPRegistrar.
Registrar address–settheSIPRegistrarIPaddressordomainname.
Registrar Port–settheSIPRegistrarport(typically5060).
Backup Registrar Address–setthebackupSIPRegistrarIPaddressordomain
name.tobeusedwherethemainregistrarfailstorespondtorequests.
Backup Registrar Port–setthebackupSIPregistrarport(typically5060).
Registration Expires–settheregistrationexpiry,whichaffectsthenetworkandSIP
Registrar load by periodically sent registration requests. The SIP Registrar can alter
the value without letting you know.
Registration State–displaythecurrentregistrationstate(Unregistered,
Registering..., Registered, Unregistering...).
Failure Reason–displaythereasonforthelastregistrationattemptfailure:the
registrar’slasterrorreply,e.g.404NotFound.

2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple