2N IP series - Page 82

Configuration manual for 2N IP intercoms
82 / 282
•
•
•
•
•
Video
Enable/disable the use of video codecs for call setups and set their priorities.
Video Resolution– set the video resolution for phone calls.
Video Framerate– set the video frame rate for phone calls.
Video Bitrate– set the video stream bit rate for phone calls.
PTZ Mode – enable the PTZ (Pan-Tilt-Zoom) function to control the camera display area
during the call via DTMF (GOLD license required) from your IP phone numeric keypad.
•
Caution
To use the NAPTR / SRV DNS query, cancel the Proxy/Registrar port setting.
