Configuration manual for 2N IP intercoms
• Access Key 1–3– set the access key to be shared by the intercom and 2N answering unit. If
the access keys do not match in the intercom and2N answering unit, the intercom cannot
call the 2N answering unitand the 2N answering unitcannot receive video from the
intercom. Each intercom can be assigned up to three access keys and thus become a
member of up to three independent2N answering unitgroups. The Access keylength is up
to 63 characters.
• The access key cannot be used with 2N
®
Indoor Touchfirmware v. 2 or 3 where it
has to be set as empty. The access key can only be used for 2N
®
Indoor
Touchversion 4 or higher.