3-12 CHAPTER 3: INSTALLING NETWORK DRIVERS
Installing Non-NetWare Drivers
To install other types of network drivers, follow these steps:
1 Refer to the section “AutoLink Installation of Client
Drivers” earlier in this chapter for directions on accessing
the main menu.
2 Select Network Drivers in the main menu.
3 Select the appropriate driver for your network operating
system from the menu choices.
The menu program copies the selected driver to a specified
disk drive directory.
4 Refer to your network operating system manuals for
instructions about using the driver with your network
operating system.
NDIS Drivers
If you have installed NDIS drivers (for running Microsoft
â
LAN
Manager or IBM
â
LAN Server, for example), you must
change the IOADDRESS line in the PROTOCOL.INI file. The file
is located on the startup diskette or the hard drive. The
3C59X EtherDisk diskette contains a sample PROTOCOL.INI file
in the directory NDIS\DOS. The NDIS drivers are as follows:
Additional Drivers
Contact your 3Com reseller for information on UNIX
â
or
other drivers.
NDIS 2.0X EL59X.DOS
NDIS 3.0X
Windows for Workgroups
EL59X.386
Windows NT, version 3.5 EL59X.SYS
To Next Page
Loading...
