Using the 3Com Installation CD 25
Using the 3Com Installation CD
The 3Com Installation CD contains the following tools and
utilities:
3Com Wireless Infrastructure Device Manager—an
administration tool that helps you select 3Com wireless LAN
devices and launch their configurations in your Web browser.
Launch the 3Com Wireless Infrastructure Device Manager
(Widman) utility
1 Turn on the computer.
2 Insert the 3Com Installation CD into the CD-ROM drive.
The CD will Autorun. If it does not Autorun, you can start the
setup menu from the Windows Start menu. For example: Start >
Run > d\:setup.exe.
3 In the menu click Tools and Utilities.
4 In the next screen, click the software you want to install.
5 Follow the on screen instructions to complete the installation.
Reboot the computer if prompted to do so.
Launching the 3Com Wireless Infrastructure
Device Manager
To be able to configure the Access Point you need to run the
Wireless Infrastructure Device Manager. Go to Start >
To Next Page
Loading...
