System Configuration 45
You can choose personal mode (PSK) or enterprise mode
(802.1X) authentication. The default setting is PSK.
If you choose PSK, you will need to enter a pass phrase of 8-63
ASCII characters or 64 hexadecimal digits.
If you choose 802.1X, you will need access to a RADIUS server,
port and secret.
Profile (SSID) Isolation
Stations connected to different profiles cannot access each
other. Choose from No Isolation (Full access), or to Isolate all
Profiles (SSIDs) from each other, check use VLAN (802.1Q)
standard.
Multi-BSSID
Check enable Multiple BSSIDS to allow each profile to send an
individual beacon and station separation configuration. This can
be done either manually or automatically.
WDS Link Settings
WDS (Wireless Distribution System) allows access points to
communicate with one another wirelessly in a standardized way.
It can also simplify the network infrastructure by reducing the
amount of cabling required. Basically the access points will act as
a client and an access point at the same time.
To Next Page
Loading...
