EasyManua.ls Logo

3Com AirConnect 9550 - Transmit Power; Beacon Interval; Data Beacon Rate (DTIM); Fragment Length

3Com AirConnect 9550
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Configuration 49
Transmit Power
Choose between the following power levels Full, Half (-3dB),
Quarter (-6dB), Eighth (-9dB) or Minimum. Default is Full.
Beacon Interval
The interval time between 20ms and 1000ms for each beacon
transmission. The default is 100ms.
Data Beacon Rate (DTIM)
The Delivery Traffic Indication Message. Specify the data beacon
rate between 1 and 255. Default is 1.
Fragment Length
The maximum packet size is used for fragmentation. Packets
larger than the size programmed in this field will be fragmented.
The Fragment Threshold value must be larger than the RTS
Threshold value. The default is 2346.
RTS Threshold
Request To Send threshold. The packet size that is used to
determine if it should use the CSMA/CA mechanism or the
CSMA/CD mechanism.

Table of Contents

Other manuals for 3Com AirConnect 9550

Related product manuals