3Com AirConnect 9550 - WDS Security Settings

System Configuration 47
Supports up to 8 point to multipoint WDS links, check Enable
WDS and then enable on the MAC addresses.
Example of a WDS topology:
AP1 <-- WDS --> Master AP (our AP) <-- WDS --> AP3<-- WDS
--> AP4
WDS Security Settings
This item is only available in Access Point Mode and Wireless
Bridge Mode.
Choose the required security level from: None, WEP, WPA-PSK
(TKIP), WPA-PSK (AES), WPA2-PSK (TKIP),or WPA2-PSK
(AES).