3Com CoreBuilder 2500 - Displaying OSPF Statistics

13-28 CHAPTER 13: ADMINISTERING OSPF ROUTING
Displaying OSPF
Statistics
Use this command to display general OSPF statistics. To display general
OSPF statistics, from the top level of the Administration Console, enter:
ip ospf statistics
This example shows OSPF statistics:
Table 13-11 shows the attributes of the OSPF statistics display.
Top-Level Menu
system
ethernet
fddi
atm
bridge
➧ip
ipx
appletalk
snmp
analyzer
script
logout
interface
route
arp
multicast
udphelper
routing
icmpRouterDiscovery
➧ospf
rip
ping
statistics
areas
defaultRouteMetric
interface
linkStateData
neighbors
routerID
partition
stubDefaultMetric
virtualLinks
➧statistics
OSPF general statistic
SPFComputations memoryFailures LSAsTransmitted
0 0 0
20 0 328
LSAsReceived routeUpdateErrors recvErrors
0 0 0
28 0 8
extLsaChanges softRestarts
0 0
109 0
Table 13-11 Field Attributes for OSPF Statistics Display
Field Description
SPFComputations Number of shortest-path-first computations done.
memoryFailures Number of nonfatal memory-allocation failures.
LSAsTransmitted Number of link state advertisements transmitted.
LSAsReceived Number of link state advertisements received.
routeUpdateErrors Number of nonfatal routing table update failures.
recvErrors Number of general receive errors.
extLsaChanges Number of external LSA changes made to database.
softRestarts Number of OSPF router soft restarts because of insufficient memory resources (implies a
fatal memory-allocation failure). Solution: change the OSPF memory partition, add memory,
or reconfigure the network topology to generate smaller OSPF databases.